Tag Archives: solar pool heater

Troubleshooting

How to put no hot water?

1 of reasons out of hot water, vacuum tube damage, need to replace the vacuum tube; 2, water pipes, valves or fittings leak, need to repair the water pipe; 3, high water pressure, hot water, Liu Buchu, need to transfer small water flow ; 4, multiple water heaters to have the string of water phenomenon, you need to install separate valve and shut the valve; 5, if the automatic installation of the Vice-tank, the tank may also be Vice-lax or is closed failure, leading to continuous supply of cold water, reducing the water temperature, it would need to replace the float valve and related components.

How solar energy leaks?

Solar water leakage reasons: 1, vacuum tube damaged, need to replace the vacuum tube; 2, the silicone ring Mifengbuyan or damaged, replace the silicone ring can be; 3, the overflow tube blockage, causing the tank deflated, need to replace the main water tank; 4. string of indoor water mixing valve, mixing valve needs to be adjusted to hot or cold water side. 5, the water pressure, automatic valve shut lax, need to install the valve.

Why is there an ordinary burst or deflated phenomenon?

Ability of ordinary low pressure solar water heater, and generally left a vent, or vents for blockage when installing the exhaust port diameter is too small, or drainage in Sheung Shui can not effectively relief (positive or negative ), or local water pressure is too large, the water flow exceeds the flow capacity of the exhaust port, so a bucket under pressure, will cause the water heater broke up or deflated, such as poor insulation in winter by ice blocking the vents, overflow / discharge long-term use of the material gas inlet steam heat to soften clogged vent Zhengkao; installed with exhaust, overflow pipe diameter size.

Heating power is too small, too slow warming how to do?

Now the total power consumption of urban households generally have limited capacity, and household appliances is greater, the distribution of solar water heaters heat with the majority of families with electricity capacity for the allowable range, and can be heated in advance to solve the temperature by slow problem, due to electric heater has been integrated thermostat, do not worry no one caused by the water temperature is too high or dangerous, if the water temperature control device is installed, you can set timed automatic constant temperature or heating mode.

Why solar water heater pipe easily broken?

Pipes are plastic products, in the sunlight easily weathered, particularly brittle Moreover, alternating hot and cold water pipes are often more likely to lead to reduced service life of the pipeline. Dealers in the sales of solar, the retail price basically includes the installation and material costs, customers also want cheap, in place, some of the dealers in order to take into account customers to install solar installation material costs, often using the general quality products, but the above measures are not taken in the sun, resulting in damages to the pipeline, it is recommended that customers do not consider the moment when purchasing solar energy cheaper, which leads to trouble after the sale. They can be considered normal PVC water pipe connected to the solar energy on the step, and then make the necessary insulation and sun protection materials, this will greatly improve the life of the pipeline, will reduce after-sale problems, of course, costs will also increase, which depends on the wishes of consumers.