How the acceptance of
Installed before the water heater should be no shade and facing south, to slant 10 degrees West. Tanks, piping, valves, fittings should be no water leakage. Not out of line pipe insulation, drain bag phenomenon. Vacuum tubes and vacuum tank plug location appropriate ? no damage, leakage, white phenomenon.
First, how to water heater inspection
Installed before the water heater should be no shade and facing south, to slant 10 degrees West. Tanks, piping, valves, fittings should be no water leakage. Not out of line pipe insulation, drain bag phenomenon. Vacuum tubes and vacuum tank plug location appropriate ? no damage, leakage, white phenomenon.
Second, how to improve water
1. Do a good job up and down the water pipe insulation.
2. Selection of small thermal conductivity of aluminum tube and cross-linked tubes.
3. Choose high-capacity water heater vacuum tube or longer, stay hot water, to improve the base temperature.
4. Sheung Shui immediately after the evening bath, try to keep the tank full overnight, to prevent the half tank water temperature is high, when the upper air circulation cooling overnight.
5. Full release after the water a little more water, the water hot water return pipe from the overflow after the expansion.
6. Even the sun two days, or half tank of water, sun one day, the water temperature can be increased.
7. Shower room temperature is low, Yuba or heater can be used to improve room temperature. Bath when the water temperature is low, add some water fill temperature.
8. Using electric heating device, fill up water power, cut off power after bathing.